Shenzhen Joint Technology Co., Ltd.
Connect Global Mobile Assets Intelligently.
Add to Cart
Logistic IoT Smart GPS Seal tracking Lock JT709C
JT709C smart logistic IoT tracking seal lock , with rechargeable lithium battery, can be used repeatedly. It provides high-precision asset timing tracking information and supports remote online, on-site BLE offline unlocking, and supports real-time monitoring and monitoring on different platforms. Real-time tracking information such as historical track playback and lock status provide customers with lower cost, safer, more efficient, and more intelligent mobile asset location management solutions.
Application:
Cargo Transportation / Security Companies / Custom Operations / Commercial / Retail
| Item | Parameters |
| Size | About 88 *62*30(mm) |
| Weight | About 200g |
| Shell Material | PA66+GF engineering plastic |
| The diameter of the lock rope | The diameter of the wire rope is 1.8mm, which can be reused |
| Steel lock rope length | 230mm (length can be customized) |
| Lock rope material | 304stainless steel |
| Support pull | ＞60kg |
| Data communication and storage | The default 4G CAT1 network data upload, optional 2G GPRS network; Can store 2000 alarms, position messages and switch lock event data |
| Communication mode | Support TCP, SMS |
| SIM card | Micro-SIM card |
| Bluetooth wireless communication | Bluetooth 4.2 or above, effective communication distance in open space> 10M |
| Positioning | Beidou, GPS, LBS |
| Vibration sensor | Built-in 3-axis Gsensor |
| Endurance | The following data are obtained when GPS and GSM signals are good, and are not applicable under bad signal conditions: 5s interval continuous work: 1 day 2 hours; Continuous working at 30s interval: 2 days and 1 hour; Continuous work at 60s interval: 3 days and 4 hours; One piece of data at 10min interval: 16 days; One piece of data at 60min intervals: 35 days. |
| Working current | The average current in working state is less than 40mA; |
| Standby current | Average standby current in fixed timing mode: <80uA |
| Battery | Rechargeable lithium battery 3.7V /2600mAh |
| Charging interface | DC2.0 connector |
| Charging current | 1000mA |
| Protection grade | IP67 |
| Working temperature | -10℃--60℃,(high temperature and low temperature battery versions can be customized) |
| Storage temperature | -40℃--60℃ |
| Relative humidity | 5%—95% |
